Attention iPhone users: iOS 15.0 through 15.2.x contain bugs that affect the auto-open feature. Versions above or below work fine.

Yellow button opener - adapter LED/Battery

Comments

2 comments

  • Official comment
    Scott Riesebosch

    James,

    The adaptor has a CR2032 battery inside. Please make sure you do not connect any wires to your garage door opener when using the adaptor. The only "wiring" is between the Tailwind controller and the adaptor. The adaptor controls the opener wirelessly.

    When you press and hold any button on the adaptor for about 1 to 2 seconds, there is a small red LED light above buttons 1 and 2 that should illuminate. If it doesn't illuminate it unfortunately means that the CR2032 battery inside is dead. If that is the case please email support@gotailwind.com

    Comment actions Permalink
  • James Pang

    Wiring is understood.

    I ordered replacement CR2032 from Amazon which should arrive today, will advise it doesn't work/LED doesn't illuminate. I don't have a meter at home to check existing battery voltage unfortunately.

    0
    Comment actions Permalink

Please sign in to leave a comment.